How to assemble the tower?
Wash & rinse all the plastic parts of the hydroponic Vertical Garden.
Connect the hose to the water pump.
Connect the hose to the pipe connector.
Place the water pump in the center of the tower base.
Insert the 2 lower pillars feeding the hose up through the center of them.
Slide the edge ring assembly over the hose and lower pillar and fit inside the tower base.
Feed the hose through the rotating collar and upper pillars then slide them into the lower pillar and each other.
Insert the pipe connector end of the hose into the water dispenser.
Insert water dispersing cap onto the pin on the underside of the water dispensing cover.
Fit the water dispensing cover to the water dispenser.
Fill the tower base with up to 16 gallons (60 litres) of water to the top of the arch on the top lower pillar.
Plug the water pump power cord into the timer plug.
